amazon

twitter

※twitterでUCニュース配信はじめました。ユーザー名 a77a フォロー自由です

2009/10/12

Supercapacitor development improves energy retention

http://dataweek.co.za/article.aspx?pklArticleId=5667&pklCategoryId=31


Supercapacitor発展は、エネルギー保持を改善します
27 May 2009
2009年5月27日
Information from Frost & Sullivan Technical Insights - 5/27/2009
フロストとサリヴァン技術的な洞察からの情報 - 5/27/2009
Research into efficient charge storage mechanisms has always been an area of interest to the electronics industry, specifically for application segments such as consumer electronics.
特に家電のようなアプリケーション部分のために、効率的な管理保管メカニズムの研究は、常にエレクトロニクス産業への関心の領域でした。

The ability to charge a storage device and maintain the charge over a considerable amount of time have been the two most important performance markers of any charge storage technology.
記憶装置に充電して、もう一度時間のかなりの量がどんな管理保管技術の2つの最も重要なパフォーマンス目印でもあったという嫌疑を維持する能力。

Over the past decade, supercapacitors have been an area of interest to the research fraternity focusing on development of highly efficient battery technologies. Supercapacitors, or ultracapacitors, are electrochemical capacitors that have an extremely high energy density.
過去の10年にわたって、supercapacitorsは非常に効率的なバッテリー技術の開発に集中している研究友愛への関心の領域でした。 Supercapacitorsまたはultracapacitorsは、とても高いエネルギー密度を持つ電気化学的コンデンサです。

While supercapacitors have made a performance mark through their ability to acquire charge at very high speeds, industrial experts feel that there is still a lot of potential to improve their retention capacity. In the current scenario, even the best of the supercapacitors discharge at a very high rate, restricting their dominance in the industrial space.
supercapacitors が非常に高速度で管理を得る彼らの能力を通してパフォーマンスマークを製作する間、産業の専門家は多くの可能性がまだ、彼らの保持能力を向上させるためにあるのを感じます。現在のシナリオでは、supercapacitorsで最高のものは非常に高い率で放出します。そして、産業のスペースで彼らの優位を制限します。

In an attempt to improve the retention capability of supercapacitors, a team of researchers from the University of California in Los Angeles has developed a manufacturing process for supercapacitors that is said to improve their retention capacity. The process employs single walled carbon nanotubes (SWCNTs). Nanotubes are considered to have the potential to replace conventionally used silicon in applications such as CPUs, memories and radio circuits, due to their small size and very encouraging electrical characteristics.
保持supercapacitors能力を向上させようとして、ロサンゼルスのカリフォルニア大学からの一連の研究者は彼らの保持能力を向上させると言われているsupercapacitorsのために製造プロセスを開発しました。プロセスは、一つの壁に囲まれたカーボンナノチューブ(SWCNTs)を使用します。彼らの小さいサイズと非常に励みになる電気特徴のために、ナノチューブは従来通り使い古したシリコンをCPU、記憶とラジオ回路のようなアプリケーションに戻すために可能性があるために考慮されます。

Traditional supercapacitors are manufactured in layers with a viscous solution between plates, similar to a capacitor. When a voltage is applied across the two electrodes, the positive ions head very quickly to one electrode, and the negative ones to another, building up a charge. This process helps the supercapacitor to store energy at a faster rate, but doesn’t provide resistance from discharging.
伝統的なsupercapacitorsはプレートの間で粘りけがある解決で層で製造されます。そして、コンデンサと類似しています。電圧が2本の電極全体で印加されるとき、正イオンは非常に速く1本の電極ともう一つへの否定的なものに進みます。そして、料金を築き上げます。このプロセスは supercapacitorがより速い率でエネルギーを保存するのを助けるが、放出することから、抵抗を提供しません。

In the new process suggested by the team from UCLA, carbon nanotubes were sprayed onto plastic films and two such films were sandwiched between an electrolyte of a water-soluble synthetic polymer, phosphoric acid and water. As a result, an ultrathin supercapacitor is formed, which is in the order of micrometres. This process prevents the supercapacitor from discharging too quickly.
UCLAからチームによって提案されるニュープロセスに、ナノチューブがそうであったカーボンは、プラスチック膜と2に映画が水溶性合成ポリマーの電解質の間に挟まれていたようであるもの、リン酸と水を噴霧しました。その結果、極薄のsupercapacitorはつくられます。そして、それはマイクロメートルのオーダーです。このプロセスは、supercapacitorがあまりに速く放出するのを防ぎます。

The current implementation of this manufacturing process yields an equivalent of 70 kilowatts per kilogram of energy (9 watt hours per kilogram) – well below the power available in traditional lithium-ion batteries, due to energy losses seen when discharging the supercapacitor. An unusually high resistance exists when energy is moved into or out of the device.
この製造プロセスの現在の実施は、エネルギー1キログラムにつき70キロワットに等しい分を与えます(1キログラムにつき9ワット時) – さて、従来のリチウムイオン電池(supercapacitorを放出するとき見られるエネルギー損失への与えられるべきもの)で利用できる力の下で。エネルギーが装置に、または、から動かされるとき、異常に高い抵抗が存在します。

The team is working on resolving these issues, and this effort is expected to result in super thin capacitors, which can be very large and rectangular, about 1 mm thick, making them suitable for use in extremely thin cellphones and mobile gadgets. As these supercapacitors power devices for an extended time period, they can also be charged via remote magnetic fields that do not require wires. As these carbon nanotube-based supercapacitors have properties such as fast charging, reliability, long-term cycling, and the ability to deliver significantly more power than batteries, they are expected to find application in power saving features in CPUs.
チームはこれらの問題を解決することに取り組んでいます、そして、この努力は厚さ1mmについてスーパー細いコンデンサ(それは非常に大きくありえて長方形でありえます)に終わることになっています。そして、彼らをとても細い携帯電話とモバイル仕掛けのために適当にします。これらの supercapacitorsが長期の時間の装置を動かして、彼らはワイヤーを必要としない遠い磁場を通して起訴されることもできます。これらのカーボンナノチューブに拠点を置くsupercapacitorsには特性(例えばバッテリーよりかなり多くの大国を届ける速く料金を請求すること、信頼性、長期のサイクリングと能力)があって、彼らはCPUで特徴を保存してアプリケーションが政権を握っているとわかることになっています。

For more information contact Patrick Cairns, Frost & Sullivan, +27 (0)21 680 3274, patrick.cairns@frost.com, www.frost.com
詳細な情報接触パトリックケアンズ、フロストとサリヴァンのために、+27(0)が21 680 3274、patrick.cairns@frost.com、www.frost.comです

0 件のコメント: